List Casting Overview

1 Introduction

Hierarchical data is surprisingly common, and are commonly represented in by nested lists.

Broadcasted operations can be performed over dimensions, but not through nesting or hierarchies.
Therefore, it is useful to be able to cast nested lists into dimensional lists.
The ‘broadcast’ package provides the cast_hier2dim() function, to cast nested lists into dimensional lists, and the cast_dim2hier() to cast dimensional lists back to nested lists.

Casting between nested and dimensional lists is not only useful for broadcasting, however.
Casting nested lists to dimensional lists has its own merits, as dimensional lists have some advantages over nested lists beside the broadcasting, such as the following:

• Performing sub-set operations on multiple recursive subsets (using the [[ and [[<- operators) requires a (potentially slow) loop, whereas multi-dimensional subsets (using operator forms like [..., ...] and [..., ...]<-) are vectorized and generally much faster.
• Re-organizing dimensions of a recursive array is generally much easier, faster, and more straight-forward than re-organizing hierarchies of a nested list.

This Vignette gives an overview of the functions ‘broadcast’ provides to cast between nested and dimensional lists.

 

2 Cast Hierarchical List to Dimensional List

2.1 Introduction

The cast_hier2dim() function casts a nested list into a dimensional list.
This section gently introduces the properties of this function through a series of examples, where each subsequent example builds on the previous one.
Familiarity with nested lists and dimensional lists (i.e. arrays of type list) is essential to follow these examples.

 

2.2 Example 1: Basics

For a first example, consider the following list:

x <- list(
  group1 = list(
    class1 = list(
      height = rnorm(10, 170),
      weight = rnorm(10, 80),
      sex = sample(c("M", "F", NA), 10, TRUE)
    ),
    class2 = list(
      height = rnorm(10, 170),
      weight = rnorm(10, 80),
      sex = sample(c("M", "F", NA), 10, TRUE)
    )
  ),
  group2 = list(
    class1 = list(
      height = rnorm(10, 170),
      weight = rnorm(10, 80),
      sex = sample(c("M", "F", NA), 10, TRUE)
    ),
    class2 = list(
      height = rnorm(10, 170),
      weight = rnorm(10, 80),
      sex = sample(c("M", "F", NA), 10, TRUE)
    )
  )
)

Before actually casting x into a dimensional list, one may want to know what the dimensions will become when casted as a dimensional list;
The hier2dim() function shows you that:

hier2dim(x)
#>       
#> 3 2 2

It returns the dimensions c(3, 2, 2).

Let’s now cast x as a dimensional list:

x2 <- cast_hier2dim(x) # actually cast nested list into dimensional list
print(x2)
#> , , 1
#> 
#>      [,1]         [,2]        
#> [1,] numeric,10   numeric,10  
#> [2,] numeric,10   numeric,10  
#> [3,] character,10 character,10
#> 
#> , , 2
#> 
#>      [,1]         [,2]        
#> [1,] numeric,10   numeric,10  
#> [2,] numeric,10   numeric,10  
#> [3,] character,10 character,10

Using the default arguments, element x[[i]][[j]][[k]] corresponds to element x2[k, j, i] (for all i, j, and k).
This can be changed, as will be shown in a later example.

As shown in the results above, cast_hier2dim() will obviously not preserve names.
It is trivially easy to set the dimnames of x2, using hiernames2dimnames (available from version 0.1.5):

dimnames(x2) <- hiernames2dimnames(x)
print(x2)
#> , , group1
#> 
#>        class1       class2      
#> height numeric,10   numeric,10  
#> weight numeric,10   numeric,10  
#> sex    character,10 character,10
#> 
#> , , group2
#> 
#>        class1       class2      
#> height numeric,10   numeric,10  
#> weight numeric,10   numeric,10  
#> sex    character,10 character,10

There, the names are now correct.

As shown above, will display a dimensional list more compactly than a nested list.
Depending on the situation this may be either be desirable or undesirable.

One can print x2 less compactly without much effort by flattening it, using the cast_dim2flat() function.
We only need to see a portion of the list in detail, so let’s look at class1 from group 1 in the flattened form:

cast_dim2flat(x2[, 1, "group1", drop = FALSE])
#> $`['height', 'class1', 'group1']`
#>  [1] 171.1569 171.0460 170.8375 171.0725 170.4451 170.3020 169.5624 170.0311
#>  [9] 172.2900 171.9337
#> 
#> $`['weight', 'class1', 'group1']`
#>  [1] 79.66315 80.05308 81.66973 80.07418 80.11185 79.92484 81.10757 80.68614
#>  [9] 81.78329 80.56880
#> 
#> $`['sex', 'class1', 'group1']`
#>  [1] "F" "F" NA  "M" "M" "F" "F" "F" NA  "M"

Dimensional lists can be easier to work with than hierarchical lists.
Consider, for example, printing the height of the first class of every group in a list - let’s compare how to do this in a nested list vs a dimensional list:

# nested list:
for(i in seq_along(x)) {
  print(names(x)[i])
  x[[i]][[1]][["height"]] |> print() # slow for-loop, messy code
}
#> [1] "group1"
#>  [1] 171.1569 171.0460 170.8375 171.0725 170.4451 170.3020 169.5624 170.0311
#>  [9] 172.2900 171.9337
#> [1] "group2"
#>  [1] 170.6609 170.9533 169.4365 170.3640 168.9861 171.5970 170.9593 170.4958
#>  [9] 170.0972 171.6512

# dimensional list:
x2["height", 1L, ] |> print() # fast vectorized operator, sleek code
#> $group1
#>  [1] 171.1569 171.0460 170.8375 171.0725 170.4451 170.3020 169.5624 170.0311
#>  [9] 172.2900 171.9337
#> 
#> $group2
#>  [1] 170.6609 170.9533 169.4365 170.3640 168.9861 171.5970 170.9593 170.4958
#>  [9] 170.0972 171.6512
x2["height", 1L, , drop = FALSE] |> cast_dim2flat() # same but more informative
#> $`['height', 'class1', 'group1']`
#>  [1] 171.1569 171.0460 170.8375 171.0725 170.4451 170.3020 169.5624 170.0311
#>  [9] 172.2900 171.9337
#> 
#> $`['height', 'class1', 'group2']`
#>  [1] 170.6609 170.9533 169.4365 170.3640 168.9861 171.5970 170.9593 170.4958
#>  [9] 170.0972 171.6512

It is also easier to re-arrange dimensions - for example using aperm() - than it is to re-arrange hierarchies.

 

2.3 Example 2: Cast from outside to inside

In Example 1, the default arguments were used for cast_hier2dim().
One of these arguments is in2out, which defaults to TRUE.

Consider a nested list x with a depth of 3, and a dimensional list X2 with 3 dimensions, where the relationship between x and x2 can be expressed as x2 <- cast_hier2dim(x, ...).
Given this, the following can be stated about in2out:

• If in2out = TRUE, which is the default and used in Example 1, element x[[i]][[j]][[k]] corresponds to element x2[k, j, i] (for all i, j, and k).
  
• If in2out = FALSE, element x[[i]][[j]][[k]] corresponds to element x2[i, j, k] (for all i, j, and k).

The default of in2out = TRUE was chosen, because elements in subsequent rows are close to each other, while elements in subsequent layers (third dimension) are generally not close to each other, and the default of in2out = TRUE attempts to retain that behaviour.

For this example, the same list will be used as in Example 1:

x <- list(
  group1 = list(
    class1 = list(
      height = rnorm(10, 170),
      weight = rnorm(10, 80),
      sex = sample(c("M", "F", NA), 10, TRUE)
    ),
    class2 = list(
      height = rnorm(10, 170),
      weight = rnorm(10, 80),
      sex = sample(c("M", "F", NA), 10, TRUE)
    )
  ),
  group2 = list(
    class1 = list(
      height = rnorm(10, 170),
      weight = rnorm(10, 80),
      sex = sample(c("M", "F", NA), 10, TRUE)
    ),
    class2 = list(
      height = rnorm(10, 170),
      weight = rnorm(10, 80),
      sex = sample(c("M", "F", NA), 10, TRUE)
    )
  )
)

Let’s once again cast this list to a dimensional list, but this time use in2out = FALSE:

hier2dim(x, in2out = FALSE) # check once again the dimensions
#>       
#> 2 2 3
x2 <- cast_hier2dim(x, in2out = FALSE) # actually cast nested list into dimensional list
print(x2)
#> , , 1
#> 
#>      [,1]       [,2]      
#> [1,] numeric,10 numeric,10
#> [2,] numeric,10 numeric,10
#> 
#> , , 2
#> 
#>      [,1]       [,2]      
#> [1,] numeric,10 numeric,10
#> [2,] numeric,10 numeric,10
#> 
#> , , 3
#> 
#>      [,1]         [,2]        
#> [1,] character,10 character,10
#> [2,] character,10 character,10

x2 is the casted list. Since in2out = FALSE, element x[[i]][[j]][[k]] corresponds to element x2[i, j, k] (for all i, j, and k).

Once again it is trivially easy to set the dimnames of x2, using hiernames2dimnames (available from version 0.1.5):

# this time, in2out = FALSE
# so we go from the surface names to the deepest names
dimnames(x2) <- hiernames2dimnames(x, in2out = FALSE)
print(x2)
#> , , height
#> 
#>        class1     class2    
#> group1 numeric,10 numeric,10
#> group2 numeric,10 numeric,10
#> 
#> , , weight
#> 
#>        class1     class2    
#> group1 numeric,10 numeric,10
#> group2 numeric,10 numeric,10
#> 
#> , , sex
#> 
#>        class1       class2      
#> group1 character,10 character,10
#> group2 character,10 character,10

There, the names are now correct.

One can print x2 less compactly without much effort by flattening it, again using the cast_dim2flat() function.
We only need to see a portion of the list in detail, so let’s look at class1 from group 1 in the flattened form:

cast_dim2flat(x2["group1", 1, , drop = FALSE])
#> $`['group1', 'class1', 'height']`
#>  [1] 168.8457 169.3623 168.9489 169.5223 171.0769 168.2667 169.4884 171.5074
#>  [9] 170.3947 169.0090
#> 
#> $`['group1', 'class1', 'weight']`
#>  [1] 79.20637 80.07480 78.91378 78.24491 79.28935 78.96673 79.59796 81.37532
#>  [9] 79.99555 80.25631
#> 
#> $`['group1', 'class1', 'sex']`
#>  [1] "F" NA  "M" "F" "F" "M" "M" "F" "M" "M"

 

2.4 Example 3: Padding

For Example 3, we take the same list as before, but remove x$group1$class2:

x <- list(
  group1 = list(
    class1 = list(
      height = rnorm(10, 170),
      weight = rnorm(10, 80),
      sex = sample(c("M", "F", NA), 10, TRUE)
    )
  ),
  group2 = list(
    class1 = list(
      height = rnorm(10, 170),
      weight = rnorm(10, 80),
      sex = sample(c("M", "F", NA), 10, TRUE)
    ),
    class2 = list(
      height = rnorm(10, 170),
      weight = rnorm(10, 80),
      sex = sample(c("M", "F", NA), 10, TRUE)
    )
  )
)

Let’s first check what dimensions it will get when casted using hier2dim():

hier2dim(x)
#>         padding         
#>       3       2       2

The dimensions are the same as in Example 1: c(3, 2, 2).
But notice the names of the output are different: the second element has the name “padding”; this indicates that some columns won’t have enough elements to completely fill the column, and so additional elements will be added as padding.

So let’s cast this list as dimensional:

x2 <- cast_hier2dim(x)
print(x2)
#> , , 1
#> 
#>      [,1]         [,2]
#> [1,] numeric,10   NULL
#> [2,] numeric,10   NULL
#> [3,] character,10 NULL
#> 
#> , , 2
#> 
#>      [,1]         [,2]        
#> [1,] numeric,10   numeric,10  
#> [2,] numeric,10   numeric,10  
#> [3,] character,10 character,10

Subset x2[, 2, 1] is filled with NULL; this is the place where x$group1$class2 was in Example 1, but since it’s not there, we need to fill something.

To make it make obvious, let’s give the array proper dimnames:

dimnames(x2) <- hiernames2dimnames(x)
print(x2)
#> , , group1
#> 
#>        class1       class2
#> height numeric,10   NULL  
#> weight numeric,10   NULL  
#> sex    character,10 NULL  
#> 
#> , , group2
#> 
#>        class1       class2      
#> height numeric,10   numeric,10  
#> weight numeric,10   numeric,10  
#> sex    character,10 character,10

Again, element “class2” is missing from element “group1”, but not from “group2”, and so padded with NULL when the list is casted as dimensional.

Sometimes, a different value than NULL is desired for padding.
So let’s replace the padding value with something really obvious, using the padding argument:

x2 <- cast_hier2dim(x, padding = list(~ "this is padding!"))
dimnames(x2) <- hiernames2dimnames(x)
print(x2)
#> , , group1
#> 
#>        class1       class2             
#> height numeric,10   ~"this is padding!"
#> weight numeric,10   ~"this is padding!"
#> sex    character,10 ~"this is padding!"
#> 
#> , , group2
#> 
#>        class1       class2      
#> height numeric,10   numeric,10  
#> weight numeric,10   numeric,10  
#> sex    character,10 character,10

Once again, one can print or present x2 less compactly by flattening it:

cast_dim2flat(x2)
#> $`['height', 'class1', 'group1']`
#>  [1] 169.9318 171.0830 168.8381 168.5981 169.8104 168.6798 169.3524 169.0464
#>  [9] 170.3485 169.3171
#> 
#> $`['weight', 'class1', 'group1']`
#>  [1] 79.23230 80.76630 78.27573 79.58224 81.47720 81.17667 80.18550 77.47160
#>  [9] 78.94010 79.77631
#> 
#> $`['sex', 'class1', 'group1']`
#>  [1] NA  "M" "M" "M" NA  NA  NA  NA  "M" "M"
#> 
#> $`['height', 'class2', 'group1']`
#> ~"this is padding!"
#> 
#> $`['weight', 'class2', 'group1']`
#> ~"this is padding!"
#> 
#> $`['sex', 'class2', 'group1']`
#> ~"this is padding!"
#> 
#> $`['height', 'class1', 'group2']`
#>  [1] 171.0072 170.3790 170.2840 170.4228 171.1720 170.1333 170.2471 170.8733
#>  [9] 169.5863 171.3795
#> 
#> $`['weight', 'class1', 'group2']`
#>  [1] 79.86766 78.42102 81.54170 78.76822 79.90623 81.20841 80.42390 78.75813
#>  [9] 81.94007 79.89371
#> 
#> $`['sex', 'class1', 'group2']`
#>  [1] "F" NA  "F" NA  "F" NA  NA  "F" "M" "M"
#> 
#> $`['height', 'class2', 'group2']`
#>  [1] 169.6014 169.9787 170.2766 168.3478 169.4625 169.6142 170.6581 170.5230
#>  [9] 168.7518 169.8092
#> 
#> $`['weight', 'class2', 'group2']`
#>  [1] 81.68821 79.17856 77.08796 79.11913 81.06692 78.12494 80.54202 79.67966
#>  [9] 79.54574 80.62062
#> 
#> $`['sex', 'class2', 'group2']`
#>  [1] "M" "F" "M" NA  NA  "M" "F" "F" NA  "M"

 

2.5 Example 4: Comparing in2out with padding

In this example, the same nested list as from the previous example is used, to demonstrate the difference between in2out = TRUE (which is the default), and in2out = FALSE.

Consider first the original list again:

x <- list(
  group1 = list(
    class1 = list(
      height = rnorm(10, 170),
      weight = rnorm(10, 80),
      sex = sample(c("M", "F", NA), 10, TRUE)
    )
  ),
  group2 = list(
    class1 = list(
      height = rnorm(10, 170),
      weight = rnorm(10, 80),
      sex = sample(c("M", "F", NA), 10, TRUE)
    ),
    class2 = list(
      height = rnorm(10, 170),
      weight = rnorm(10, 80),
      sex = sample(c("M", "F", NA), 10, TRUE)
    )
  )
)

On the left side the list is casted as dimensional using the default of in2out = TRUE, with proper names assigned.
On the right side the list is casted as dimensional using in2out = FALSE, again with proper names assigned.

x2 <- cast_hier2dim(x)
dimnames(x2) <- hiernames2dimnames(x)
print(x2)
#> , , group1
#> 
#>        class1       class2
#> height numeric,10   NULL  
#> weight numeric,10   NULL  
#> sex    character,10 NULL  
#> 
#> , , group2
#> 
#>        class1       class2      
#> height numeric,10   numeric,10  
#> weight numeric,10   numeric,10  
#> sex    character,10 character,10

x2 <- cast_hier2dim(x, in2out = FALSE)
dimnames(x2) <- hiernames2dimnames(x, in2out = FALSE)
print(x2)
#> , , height
#> 
#>        class1     class2    
#> group1 numeric,10 NULL      
#> group2 numeric,10 numeric,10
#> 
#> , , weight
#> 
#>        class1     class2    
#> group1 numeric,10 NULL      
#> group2 numeric,10 numeric,10
#> 
#> , , sex
#> 
#>        class1       class2      
#> group1 character,10 NULL        
#> group2 character,10 character,10

 

3 Cast Dimensional List to Hierarchical list

‘broadcast’ provides the cast_dim2hier():
cast_dim2hier() takes a dimensional list (i.e. an array of type list), and casts it to a nested list.

Consider the following recursive array as an example:

x <- array(c(as.list(1:11), ~hello, as.list(month.abb)), c(4:2))
dimnames(x) <- list(
  letters[1:4],
  LETTERS[1:3],
  c("group1", "group2")
)
print(x)
#> , , group1
#> 
#>   A B C     
#> a 1 5 9     
#> b 2 6 10    
#> c 3 7 11    
#> d 4 8 ~hello
#> 
#> , , group2
#> 
#>   A     B     C    
#> a "Jan" "May" "Sep"
#> b "Feb" "Jun" "Oct"
#> c "Mar" "Jul" "Nov"
#> d "Apr" "Aug" "Dec"

Like cast_hier2dim(), cast_dim2hier() also has the in2out argument, which (again) defaults to TRUE.
Let’s cast the above dimensional list to a nested list, and compare the results when using in2out = TRUE (on the left) versus in2out = FALSE (on the right):

x2 <- cast_dim2hier(
  x, distr.names = TRUE
)
lobstr::tree(x2)
#> <list>
#> ├─group1: <list>
#> │ ├─A: <list>
#> │ │ ├─a: 1
#> │ │ ├─b: 2
#> │ │ ├─c: 3
#> │ │ └─d: 4
#> │ ├─B: <list>
#> │ │ ├─a: 5
#> │ │ ├─b: 6
#> │ │ ├─c: 7
#> │ │ └─d: 8
#> │ └─C: <list>
#> │   ├─a: 9
#> │   ├─b: 10
#> │   ├─c: 11
#> │   └─d: S3<formula> ~hello
#> └─group2: <list>
#>   ├─A: <list>
#>   │ ├─a: "Jan"
#>   │ ├─b: "Feb"
#>   │ ├─c: "Mar"
#>   │ └─d: "Apr"
#>   ├─B: <list>
#>   │ ├─a: "May"
#>   │ ├─b: "Jun"
#>   │ ├─c: "Jul"
#>   │ └─d: "Aug"
#>   └─C: <list>
#>     ├─a: "Sep"
#>     ├─b: "Oct"
#>     ├─c: "Nov"
#>     └─d: "Dec"

x2 <- cast_dim2hier(
  x, in2out = FALSE, distr.names = TRUE
)
lobstr::tree(x2)
#> <list>
#> ├─a: <list>
#> │ ├─A: <list>
#> │ │ ├─group1: 1
#> │ │ └─group2: "Jan"
#> │ ├─B: <list>
#> │ │ ├─group1: 5
#> │ │ └─group2: "May"
#> │ └─C: <list>
#> │   ├─group1: 9
#> │   └─group2: "Sep"
#> ├─b: <list>
#> │ ├─A: <list>
#> │ │ ├─group1: 2
#> │ │ └─group2: "Feb"
#> │ ├─B: <list>
#> │ │ ├─group1: 6
#> │ │ └─group2: "Jun"
#> │ └─C: <list>
#> │   ├─group1: 10
#> │   └─group2: "Oct"
#> ├─c: <list>
#> │ ├─A: <list>
#> │ │ ├─group1: 3
#> │ │ └─group2: "Mar"
#> │ ├─B: <list>
#> │ │ ├─group1: 7
#> │ │ └─group2: "Jul"
#> │ └─C: <list>
#> │   ├─group1: 11
#> │   └─group2: "Nov"
#> └─d: <list>
#>   ├─A: <list>
#>   │ ├─group1: 4
#>   │ └─group2: "Apr"
#>   ├─B: <list>
#>   │ ├─group1: 8
#>   │ └─group2: "Aug"
#>   └─C: <list>
#>     ├─group1: S3<formula> ~hello
#>     └─group2: "Dec"

The added distr.names = TRUE argument will distribute the dimnames in a logical way over the nested elements.